Doors made to your requirements, including easy to install mounting
hardware.
Bulk Rolls of vinyl strip for those who prefer to make their own Strip
Doors. Use the recommendations below to help you determine proper gauge, width and
overlap. Door Mounting Hardware can also be purchased separately.
Individual Strips to replace worn or damaged strip.
Application
Thicknes
Width
Overlap
For lightweight
traffic closures only, such as conveyor doors (not for exterior openings).
.060"
6"
Full (3")
For freezers,
coolers, refrigerated trucks and personnel doors.
.080"
8"
2"
For interior
doors to 10' high. Not recommended for exterior opening.
.080"
8"
Full (4")
For minimum
protection for interior/exterior openings 9' to 14' high.
.120"
12"
4"
For better
protection for interior/exterior openings 9' to 14' high, severe temperature and
windy conditions.
.120"
12"
Full (6")
For exterior doors up to 25'
high with heavy vehicular traffic.
.160"
16"
4"
For exterior doors up to 25'
high with constant heavy-duty equipment traffic. Best for sound control. Not recommended
for frequent personnel traffic.
.160"
16"
Full (8")
Guide for determining the strip quantity
required for your enclosure
6" wide strip with 2" overlap; multiply sq. ft. of opening by 3.0
8" wide strip with full (4") overlap; multiply sq. ft. of opening by 3.0
16" wide strip with a 4" overlap; multiply sq. ft. of opening by 1.0
6" wide strip with full (3") overlap; multiply sq. ft. of opening by 4.0
12" wide strip with a 4" overlap; multiply sq. ft. of opening by 1.5
16" wide strip with a full 8" overlap; multiply sq. ft. of opening by 1.5
8" wide strip with 2" overlap; multiply sq. ft. of opening by 2.0
12" wide strip with a full (6") overlap; multiply sq. ft. of opening by 2.0
On WALL MOUNT installations, remember to allow an
extra 3" on top and 6" on each side to the measure of the door.
Information and specifications subject to change without notice
Serving
the World 
